Gard

Floor Sealer

 

Designed as a base coat to protect floors. It boasts superior levels of durability, is detergent resistant and leaves a smooth surface for the application of floor finish

Format Code
5 L 53781
20 L 50112

Approvals & Certifications
More Info

How To Use

Preparation: Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry.

Application: Using a clean mop or sprayer, apply 2-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30-60 minutes or more depending on humidity condition.

Coverage: Coverage per 5 L is 170 m² (1830 ft²) to 280 m² (3014 ft²) depending upon porosity of the floor.

Where To Use

Suitable for all resilient and non-resilient floors except for unsealed wood and cork.


Specifications

Colour White
Odour Acrylic
pH 8.4 - 8.8
VOC Content 31 g/L
Viscosity Not Determined
Solvents No
Phosphates No
WHMIS Yes
Heated Freight Yes
TDG Regulated No
Shelf Life Up to 3 years after manufacturing

Documents


Similar Products


You Might Also Like