Emerald

Hard Surface Cleaner & Degreaser

Its safe yet powerful formula effectively cuts through grease, oil and heavily soiled surfaces. This biodegradable cleaner/degreaser is solvent free.

Also available as ready-to-use.

More Info

Dilute with unheated tap water according to the dilution rates listed on the label. Apply with a sprayer, sponge, mop or cloth.

Prepare the Area: Remove all obstacles from the work zone, including walk-off mats. Place wet floor signs at every entrance to ensure safety.
Initial Cleaning: Dust mop the entire floor thoroughly. Remove any stuck-on debris such as gum, tape, or glue. Recommended product: Doodle Buster)
Dilute the Product: Mix Emerald Degreaser at a 1:40 dilution with unheated tap water.
Apply the Solution: Evenly apply the diluted solution to the work area. Allow it to dwell for 3–5 minutes to break down grease and soils effectively.
Scrub the Surface: Using a floor machine (175 RPM) or an auto scrubber equipped with a blue floor pad, scrub the area thoroughly.
Recover the Solution: Pick up the soiled solution using a wet vacuum or an auto scrubber.
Rinse the Floor: Rinse the entire area with cold water to remove any residual cleaner.
Detail the Area: Wipe down any adjacent surfaces that may have been splashed during the scrubbing process.
Dry and Inspect: Allow the floor to dry completely and inspect for a uniform, clean appearance.
Restrict Access: Keep all traffic off the cleaned area until the floor has been recoated with floor finish, if applicable.

Suitable for floors, painted walls, woodwork, ceramic tile or metal.

Colour	Green
Odour	Low
Scent	Unscented
pH	10.5 - 11.2
Viscosity	Not Determined
Solvents	No
Phosphates	No
WHMIS	Yes
Heated Freight	Yes
TDG Regulated	No
Shelf Life	Up to 3 years after manufacturing
UL	2759