Elite

All Systems Floor Finish

 

Developed for use in high profile areas where the ultimate wet look gloss and durability are desired.

Format Code
5 L 52051
20 L 52052

Approvals & Certifications
More Info

How To Use

Preparation: Before your initial application, the floor must be stripped of any old finish, rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish.

Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more.

Maintenance: Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and recoat worn traffic areas as required. Spray buff as needed. Burnishing daily is highly recommended but not imperative.

Coverage: Coverage per 5 L is 170 m² (1830 ft²) to 280 m² (3014 ft²) depending upon porosity of the floor.

Where To Use

Suitable for all resilient and non-resilient floors except for unsealed wood and cork.


Specifications

Colour White
Odour Acrylic
pH 8.2 - 8.7
VOC Content 52 g/L
Viscosity Not Determined
Solvents No
Phosphates No
WHMIS Yes
Heated Freight Yes
TDG Regulated No
Shelf Life Up to 3 years after manufacturing

Documents


Similar Products


You Might Also Like