Gran-Prix XL

Fini à plancher tout système

Experience the transformative power of Gran Prix. Our customers rave about the remarkable results it delivers for their floors. When only the best will do, the Gran Prix is the clear choice. No matter the type of flooring you have - hardwood, vinyl, tile, or terrazzo - Gran Prix is compatible with a wide range of surfaces, providing flawless adhesion and consistently exceptional results throughout your space. This customer favourite, boasting a 19% solid formula, has earned its reputation thanks to its impressive high gloss finish, effortless application, and the amazing shine it maintains with the help of a simple spray buff or UHS. Trust Gran Prix for reliable, cost-effective, and simplified floor care.

Approvals & Certifications

More Info

Format	Code
5 L	52020
20 L	52021

How To Use

Preparation: Before your initial application, the floor must be stripped of any old finish and rinsed thoroughly with potable water and allowed to dry. Sealing the floor is recommended prior to applying a floor finish.

Application: Using a clean mop and bucket, apply 1-3 coats (depending on the porosity of the floor) allowing the floor to completely dry between coats, at least 30 minutes or more.

Maintenance: Sweep or dry mop frequently. Wet mop or auto-scrub periodically with a properly diluted neutral detergent. Scrub and recoat worn traffic areas as required. Spray buff as needed. Remove any surface dirt and dust with a treated mop. Wet mop or auto-scrub periodically with a neutral detergent. Scrub and recoat worn traffic areas as required.

Coverage: Coverage per 5 L is 186 m² (2000 ft²) to 297 m² (3200 ft²) depending upon porosity of the floor.

Where To Use

Suitable for all resilient and non-resilient floors except for unsealed wood and cork.

Colour	White
Odour	Acrylic
Non-Volatile Solids	19%
Refractive Index	25.7 - 26.2
pH	8.2 - 8.7
VOC Content	33 g/L
Viscosity	Not Determined
Solvents	No
Phosphates	No
WHMIS	No
Heated Freight	Yes
TDG Regulated	No
Shelf Life	Up to 3 years after manufacturing